Optical fiber attenuator is a kind of optical passive device. It is used for optical power performance, optical fiber instrument debugging and correction in optical communication systems, attenuates the input optical fiber signal power, and prevents distortion of the optical receiver due to excessive input optical power. The product is manufactured by using attenuating fiber doped with metal ions, which can adjust the optical power to the required level; LC fixed attenuators provided by HYC have the advantages of easy installation, good interchangeability, high and low temperature resistance, etc. Used in telecom networks, CATV, data centers and other fields.

MPO connector comes with multifiber applies to high density in data center or telecommunication systems. It depends on the high precision metal guide pin and the high precision ferrule pin hole to ensure the optical alignment. It’s comes with SM,SMLL,MM,MMLL,8F,12F, 24F,regular force spring, high force spring for your choice.

It's a real one-piece integrated structure design. Comparing to the conventional ultrasonic welded or two-parts pressed structure, this one is more stronger. Due to the one-piece body, it can avoid breaking during the ultilization; Also, a self-adjusting stable spring was matched. As well as a regular spring for more choice.

MPO connector comes with multifiber applies to high density in data center or telecommunication systems. It depends on the high precision metal guide pin and the high precision ferrule pin hole to ensure the optical alignment. It’s comes with SM, MM,MMLL,16F,32F, high force spring for your choice.

Fiber connector is a device for detachable connection between fiber and fiber. It can precisely connect two end faces so that the optical energy can be coupled to the receiving optical fiber to the maximum extent. The MPO lockable connector is assembled with a buckle to be locked on the optical module or adapter to avoid unexpected releasing and reduce the chance of getting dusty on the connector's surface.

MPO 1x2 Conversion Patch Cords are terminated with MPO connectors on both ends, can provide more possibilities for the existing 24-fiber cabling system. eliminate the wasted fibers in current 40G transmissions and upcoming 100G transmission. Compared to purchase and install separate conversion cassettes, using MPO 1x2 Conversion Patch Cord is a more cost-effective and lower-loss option. It can be deployed in QSFP AOC, QSFP28 AOC, CXP AOC, CFP AOC, CPAK AOC products, etc.